Round Semirigid Strength Member

PRODUCT DESCRIPTION

Semi rigid Thermosetting resin glass reinforced round strength members have been specifically developed in order to offer Customer a more engineered and sophisticated thermosetting product for armouring purposes if compared to rigid ones .
The specific resin used will allow the product to reach major bending radius (up to 180 degrees bending) without showing any fragile breakage, offering similar tensile properties of rigid products

• SRTEV….stands for semi rigid round strength member
  
• DDD stands for nominal size in hundredths of millimetres.
• CCC =101 stands for thermosetting resin coating.
• CCC =106 stands for thermoplastic EAA resin coating.

Example: SRTEV125/101 stands for thermosetting resin coated Glassline™, nominal size 1.25 mm

All sizes between 0.25 mm and 4.0 mm are available with an increase of 0.05 mm.

PHYSICAL PROPERTIES
MEASURED SIZE	Nominal+0.01mm
SIZE TOLERANCE (On measured size)	± 0.05 mm	Diam. < 1.0 mm
	± 0.07 mm	Diam. < 3.0 mm
	± 0.10 mm	Diam. > 3.0 mm
COATING THICKNESS	0.02 mm
DENSITY	2.1 kg/dm3	ASTM D792
GLASS CONTENT (by wt)	(by wt) > 80 %	ISO 1172
THERMAL EXPANSION C.	5.2 10-6 (°C)-1	ASTM D696
MECHANICAL PROPERTIES
YOUNG'S MODULUS TENSILE STRENGTH ELONGATION AT BREAK	> 50000 MPa > 1500 MPa > 3%	ASTM D3916 ASTM D3916 ASTM D3916
BEND RADIUS IN AIR BEND RADIUS IN AIR BEND RADIUS IN WATER	> 180 degrees > 180 degrees > 180 degrees	(RT, 1 week) (80°C, 24 hrs) (80°C, 24 hrs)
Note: For Technical information on specific sizes please refer to the specific Technical Data Sheets which can be obtained on request (see format in Customers' Inquiries)